Italsensor TS58 - Incremental Shaft Encoder

TS580 – TS581

Optical incremental encoder – Solid shaft

Low-cost encoder for general industrial applications.

Body diameter (mm): 58
Flange square flange, servo standard, servo-clip, FRE (REO444)
Diameter shaft (mm): 6, 8, 9.52, 10, 11, 11R
Resolution (PPR) max 5000
Interface LD, LD2, PP2, NPN, PNP

MECHANICAL SPECIFICATIONS

Dimensions:     see drawings
Shaft:     stainless steel
Shaft loading:     axial 200N; radial 200N
Shaft Rotation Speed:     10.000 RPM to short cycle time; 6000 RPM continuous; 2000 RPM whit hole shaft proof
Starting torque a 25° C     0,025 Nm; 0,040 Nm whit hole shaft proof
Moment of inertia:     40g cm²
Bearings life:     5 x 10^9  revolutions (minimum)
Weight:     ~ 0,3 kg

ELECTRICAL SPECIFICATIONS

Output frequency:    up to 300 kHz
Sinchronous index output:     default on channel A; B – A+B Optional
Supply current without load:     150 mA max
Protection:     short circuit protection (only output LD2 and PP2) against inversion of polarity (except 5V, 5/28V)

MATERIALS

Flange:     aluminium non corroding
Housing:     Polyamid 6 (PA6)

ENVIRONMENTAL SPECIFICATIONS

Operating temperature range:    -10°C ÷ +70°C
Storage temperature range:     -30°C ÷ +85°C
Relative humidity:     98% RH without condensing
Vibrations:     10 g (from 10 up to 2.000 Hz)
Schock:     20 g (for 11 ms)