Greenbank alternative encoders available
for most current and obsolete units.

Worldwide installers to distributors of Drives*,
Encoders and Tachogenerators
from various manufacturers
*see info in Motors section

Sole UK Distributors of Italsensor Encoders
Official stockists/distributors of Baumer Hubner, IVO and Thalheim products
Stockists of Radio Energie/Precilec/Zodiac Aerospace Tacho Generators

TISPW581 Programmable Hollow shaft encoder

TISPW581 - Italsensor Programmable Encoder

Programmable hollow shaft encoder from 1 - 65000 pulses

Stocked at 15m hollow bore with bore reducers available.

5-30V      Line Driver or Push pull

Hollow shaft with collar acciaio inox - stainless steel (UNI EN 10088-3 DN. 1.4305)
ELECTRICAL SPECIFICATIONS
resolution: programmable from 1 to 65536
output frequency:  up to 300 kHz
Index pulse positioning:
programmable counting direction:  - user selectable (CW or CCW)
Power consumption: <500 mW (a vuoto - without load)
Protection: inversion of polarity protection

MATERIALS
Flange: aluminium non corroding
Housing: Poliammide 6 (PA6); Polyamid 6 (PA6) - (metallic on request)

ENVIRONMENTAL SPECIFICATIONS
Operating temperature range: -25°C - +85C
temperature range +
Relative humidity : 98% RH without condensing
Vibrations: 10 g (da 10 a 2.000 Hz) - (From 10 up to 2.000 Hz)
Shock: 20 g (per 11 ms) - (for 11 ms)
Shaft loading: assiale - axial: 100 N; radiale - radial 100 N
Shaft rotational speed:10.000 RPM - to short cycle time; 6.000 RPM - continuous;
2000 giri/min con asse stagno - with protection shaft
Starting torque at 25°C: 0,025 Nm shaft; *(1)
Moment of inertia: 40 g cm2
Bearings life: 5 x 10 (9) giri (minimo) - rev. min.

Contact Us

Address

Greenbank Machinery & Plant LTD
16 Edna Street
Hyde
Cheshire
SK14 1LD